JC 04 · measurements in cm
| S | M | L | XL | |
|---|---|---|---|---|
| 1Pit to pit | 59 | 61 | 64 | 67 |
| 2Shoulder | 47.5 | 49 | 51 | 53 |
| 3Sleeve length | 64.5 | 66 | 67.5 | 69 |
| 4Total length | 68 | 70 | 72 | 74 |
| Hem relaxed | 48 | 50 | 53 | 56 |
| Hem stretched | 56 | 58 | 61 | 64 |
| Armhole | 24 | 25 | 26 | 27 |
| Upper arm | 21.5 | 22.5 | 23.5 | 24.5 |
Measurements are taken flat, from seam to seam. Total length is measured at the centre back, excluding the collar.
Compare with what you already have
- Use a jacket that fits you well and lay it flat on a surface. Compare its measurements with the table above.
- Measure the numbered points as in the drawing and pick the size that comes closest.
How to measure each point
1Pit to pit Measure straight across the jacket from one armpit seam to the other.
2Shoulder Measure straight across the back, from one shoulder seam to the other.
3Sleeve length Starting at the shoulder seam, measure down to the end of the sleeve.
4Total length Measure down the centre back, from the base of the collar to the bottom hem.